Wake County, Triangle Transit, Capital Area Metropolitan Planning Organization (CAMPO), City of Raleigh, Town of Cary, Research Triangle Foundation, NC State University and Raleigh Durham Airport are partners in planning transit..
The Transit Advisory Committee (TAC) will meet Thursday, October 22, 2015, to provide direction for the development of a single draft transit plan.
As you will recall, the TAC is a group of 72 community members, created by the Transit Strategy funding partners. The goals and vision generated by the committee have been used to frame the plan components presented to the public.
At this meeting the group will hear responses and reaction to the four example options presented to the public in May 2015. The example options were specifically developed to allow the community to provide input on the trade-offs that exist in transit investment. The Transit Advisory Committee will provide the direction for the development of a single draft plan specifically addressing the amount of investment focused on infrastructure, transit service, high frequency routes and express routes.
The TAC is led by the Transit Strategy consultant team Jarrett Walker and Associates and Kimley Horn.
All interested parties are invited to attend all or a portion of the meeting and observe the work of the TAC. Consultants and staff will be available to answer observer questions during breaks and TAC activities.
When we think of transit, we think of different things. Some people think buses. Others think of subway systems. No matter the image that comes to mind, we think of people moving. This week’s profile is from a rider that moves through Raleigh each day to get between two of our moderate sized communities. Like many of our profile participants, Tom takes time on the bus to relax, but sees ways our system can be improved.
Name: Tom Franklin
Town you live in: Garner
How often do you ride transit? Monday – Friday
Where do you ride to/from? Garner to Chapel Hill (and back)
Why do you choose transit? UNC offered a free Go Pass to people interested in taking the bus instead of driving
– What do you like best? The ability to take a nap before and after work; not having to deal with stop and go beltway traffic. The professionalism and friendliness of the TTA drivers and staff
– Any downfalls? The lack of communication between the different bus/transit companies servicing the Triangle area (CAT and TTA). The lack of (promised) wifi on buses. The lack of convenient daytime (work hours) service from Chapel Hill to Raleigh/Garner.
If transit wasn’t available what would you do? Would others be impacted? I would need to buy a second car and start driving to work again. This would financially impact both myself and my wife. If rapid transit were available (rail or bus) how would it change the way you move through the community? I would definitely take rapid transit to and from Chapel Hill if it was available.
Have you read the Expanded Transit Choices Report? No. Anything else you would like to add? I urge TTA and CAT to revisit the Garner 102 route and transfer the day-to-day operation of the 102 route back to TTA.
Connections between transit systems is important, as is timing. Feedback like this will help the Wake Transit Partners to develop a recommended transit plan for the region. Please share your thoughts by completing a survey. All of the feedback will be reviewed and considered as the plan is developed.
Would you like to share your transit story? Contact Sarah Williamson-Baker at email@example.com
Jarrett Walker, one of the consultants assisting us with our Transit Strategy, created the below blog post about the “Ridership Recipe.” This post, also published on his Human Transit blog, relates directly to Wake County as we contemplate the four alternatives, and in particular the tradeoff between focusing resources on ridership or coverage.
When transit is planned with the goal of high ridership, what does that mean? When you tell network designers like me to maximize ridership, what do we do?
Maximizing ridership is like maximizing the number of customers for any business. You have to think like a business, and the first thing businesses do is choose which markets they will enter. Unlike governments, businesses feel no obligation to provide their service in places where they would spend a lot of money to serve very few people.
(Businesses also want customers to pay more rather than less, but for our purposes here let’s hold fares or prices constant, and just think about how you get lots of customers.)
Everyone understands that McDonalds is a business, which means it is under no obligation to provide a burger restaurant within 1/2 mile of every citizen. If they were, every ranch (population 4) in North Dakota would need to have its own McDonalds at the end of the driveway. Obviously the company would go bankrupt staffing all of these shops dotted across the prairie, miles from the nearest town, each with a smiling team waiting (and waiting, and waiting) for a customer to appear.
So in the real world of business, a rancher in North Dakota may have to drive 50 miles to find a McDonalds, because the only one will be in a large town where there are enough customers. We don’t describe this situation as McDonalds being unfair to rural folks, because we know McDonalds is a business doing what businesses do. Businesses deploy their product or service where it will succeed.
Commentators sometimes criticize transit authorities for low ridership, as though transit were a failing business. But transit authorities are rarely directed to maximize ridership as their primary goal, so they’re not failing if they don’t. In democracies, whoever makes the decisions for a transit authority is accountable to voters. These officials listen to their constituents, and sometimes decide that to some degree, low-ridership services are necessary and important. This is usually because either (a) someone feels entitled to service (“We pay taxes too!”) or (b) someone needs the service really badly (“If you cut this bus, we’ll be trapped.”). Those can both be valid government purposes, but they lead to the creation of services where ridership is not the objective. The objective, instead, is to satisfy (a) and/or (b) above.
Services whose purpose is not ridership are called coverage services — or at least I’ve been calling them that for over a decade and the term is catching on. Coverage is an apt term because the result is usually to spread out service over a vast area so that everyone gets a little bit, no matter where they live.
However, spreading it out means spreading it thin. Any fixed service budget, divided over such a huge number of routes, yields low frequency, maybe a bus once an hour, and not many people find that useful for reasons we’ll explore below. So ridership is usually low on these services, exactly as we network designers expect. But since ridership isn’t the purpose, that can be fine.
So you will not begin to make clear transit choices until you are clear, at every moment, about whether you want transit service to have high ridership. To the extent that you do, you need to tell transit agencies to think like businesses, which means deploying the service not where people feel entitled to it, or where they need it badly, but where the maximum ridership will result. On the other hand, if you do want to respond to people’s expectations and needs, you need to carve out an exception to your desire for high ridership, because high ridership is not, in fact, what you’re advocating.
Did you just hear me say that we should deploy transit service for maximum ridership. If so, read the last paragraph again. There is no “should” in that paragraph. There is only a description of the consequences of choices that you, and your community, are free to make.
It’s not a yes-or-no question, of course. A more precise question is: “what percentage of our resources should our transit authority spend pursuing maximum ridership?” When transit authorities answer that question, then everyone knows what the purpose of the service is. The services that are trying to attract high ridership can be assessed for their ridership, and the coverage services, where ridership isn’t the goal, no longer count as failing because ridership is not what they’re trying to do. In our network redesign for Houston, for example, the Board said “deploy 80% of our budget pursuing ridership.” That’s what the plan does. We know which lines in the New Network are intended for high ridership, and those are the ones where we’ll expect that outcome. (For my peer-reviewed academic paper on this issue, see here.)
So for now, I’ll suppose that you do want a ridership-maximizing transit system. What does that look like? How do we network designers know that we’re designing one?
First, you really must understand transit frequency. It’s the elapsed time between consecutive buses (or trains, or ferries) on a line, which determines the maximum waiting time. People who are used to getting around by a private vehicle (car or bike) often underestimate the importance of frequency, because there isn’t an equivalent to it in their experience. A private vehicle is ready to go when you are, but transit is not going until it comes. High frequency means transit is coming soon, which means that it approximate the feeling of liberty you have with your private vehicle – that you can go anytime. Frequency is freedom!
At the opposite extreme, if you live in a single family house with a driveway and usually get around by car, imagine that there were an automated gate at the end of your driveway that only opened once an hour, on the hour. When it’s closed, you can’t get your car in or out. If that were your situation, your biggest transportation problem would not be traffic congestion, or how fast you can go on the freeway; it would be how to get this frigging gate to open more often. That’s how low frequency feels to a potential transit customer, and why frequency often swamps other factors, like speed, in determining whether transit is actually useful.
Frequency has three independent benefits for the customer, which helps to explain why high frequency is so critical to sustained high ridership:
It reduces waiting, which is everyone’s least favorite part of a trip. (No, a smartphone that tells you when the bus comes doesn’t solve the problem of waiting; we are still talking about time when you’re not where you want to be.) The basic sensation of being able to go when you want to go is the essence of frequency.
It makes connections easy, which makes it possible for a pile of transit lines become a network. In transit, this is huge. A transit line without good connections is useful for travelling in one dimension, along that line. A network of frequent lines makes it easy to travel in two dimensions – all over the city, or at least all over the part of it that supports frequent service. This network effect massively expands the usefulness of every line in the network, thus increasing each line’s ridership potential.
Finally, frequency is a backstop for problems of reliability. If a vehicle breaks down or is late, frequency means another will be along soon.
If you think about how these three things govern the real usefulness of transit, you can begin to see why frequency is such a ridership-driver. Here’s a simple scatterplot with a dot for each bus route in a whole bunch of US agencies where my firm has worked. Note that higher frequency (leftward on the X axis) correlates with high productivity (ridership per unit of service cost).
This is more amazing than it looks. Double the frequency of a line and you’ve doubled its operating cost, so you would expect high frequency to pull productivity down. And indeed, if you do that to a particular line at a particular moment, it usually does.
But overall and in general, high frequency correlates with high productivity, despite the high cost of the frequency. That’s because (a) frequency is such a powerful ridership-driver for the reasons outlined above and (b) frequency tends to be deployed where it will succeed.
How do we identify those places? Stay tuned.
Finally, the duration of service matters, and it works much the way frequency does. Service later into the evening, or on weekends, initially appears to be a bad investment, because we’re adding lots of service when there aren’t as many riders. But in the long run, its availability tends to correlate with high ridership. That’s because riders won’t use the service in one direction unless they can get back, so evening service, even if the buses aren’t full, is a key part of how we build high ridership all day. The same is true of weekends. If you commute five days a week including some weekend days – like many people in the retail, entertainment, or service sectors – you are unlikely to rely on transit unless it works for you on all of those days. One of the key features of our Houston redesign is bringing weekend service up to the same level as weekdays, so that except for the weekday rush hour, the bus comes the same time every day.
Diversity, Not Specialization
How do we network designers know where transit will succeed? You might assume that this is about detailed demographic analysis, detailed studies of travel behavior, and lots of conversations with citizens, finding out who people are and exactly what their needs are.
Well, we do a lot of that, and the data is interesting and helpful in resolving many details of a network plan. But in the end, it’s less important to high-ridership planning than a simpler question: “Where can we find lots of people, and places where lots of people are going, located in ways that are cheap for us to serve?”
The most successful transit, in terms of ridership achieved for a fixed operating budget, is called mass transit for a reason. They succeed precisely because they are not designed around the details of anyone’s needs. Riding them — a big city subway system, for example — you will not get much assurance that planners of the system understand you in particular, or know what trip you’re making now, or care much about your unique point of view. Instead, you’re likely to notice how many different people are finding the same vehicle useful. You’re likely notice diversity. We’ll come back to that.
At the opposite extreme, if you use a suburban or small town bus that never has more than five people on it, you may get very personal attention. The driver may even remember your name. But that charming fact is made possible by how low the ridership is.
As transit ridership potential goes up, responsiveness to each individual’s needs and desires goes down. The big-city subway doesn’t take care of your personal needs, but that’s inseparable from why it’s massively liberating to so many people.
It’s flattering to us, as individuals, to think that if transit just specialized more – just took better care of me or people like me – it would have higher ridership. That’s why we hear so much about it in the media — because it’s what we want to hear.
But specialization is simply not how the transit product succeeds at attracting great masses of people. Transit achieves high ridership by being useful and liberating to lots of people, not to any particular kind of person. High ridership arises from diversity, not specialization.
There are small exceptions, which happen when a large number of people are all doing the same thing at the same time. A big suburban school lets out at 3:00 PM, or the ball game ends at the stadium, or white-collar workers all want to get from an outer suburb to downtown at 8:00 AM. The “peak only” column in the scatterplot above shows some of those. But these exceptions are always about brief periods of time. What I’ve been talking about, everywhere but this paragraph, is the kind of ridership that’s sustainable all day and all week, and that supports continued growth into evenings and weekends to support an “18-hour” or even “24-hour” city. Specialization by time of day can fill some transit vehicles, but it’s a vastly smaller market (and a more expensive one to serve) than the kind of demand that’s happening all the time.
So Where Should We Run?
So to the extent that a transit authority is seeking sustained high ridership across long hours, it would focus its most powerful-but-expensive tools, high frequency and long duration, in the places where they can succeed.
Where are those places? Like any business, we need to put the service where
(a) there are lots of potential customers.
(b) those customers will be able to access our service easily and
(c) our costs of providing service are not too high, compared to the number of customers we’ll attract.
Now, let’s think about the high-ridership transit product. It’s simplest unit is a line or route with a number of vehicles running back and forth along it.
The cost of providing the service is based on the number of transit vehicles running along it (let’s call them buses, but all this is the same for trains or ferries as long as each one has employees on board. This number goes:
Up with frequency. Double how often a bus comes, and you’ve doubled the number of buses on each mile of the line, doubling the cost.
Up with distance. Double the length of the line and you’ve doubled its cost.
Down with speed. Double the speed of the service, and the buses take only half as long to cycle the line as they did before, so you need only half as many of them to deliver the same service. You’ve halved the cost.
For now, let’s hold frequency and speed constant, and focus on distance. The key question for high-ridership transit, then, is “how far do we have to go to be available to a given number of people?” This is transit’s version of the question any business asks about a particular venture, like opening a shop in a particular place: “How much will it cost to be useful and attractive to an adequate number of customers?”
In transit, the answer is: It depends on the pattern of development, and especially on four measurable things:
Let’s look at each in turn.
The image below shows two towns and a transit line running through them. The transit line in the two images is identical, so it has the same cost. But in the first town, the line is available to twice as many people, because the town is twice as dense. That means that if everybody in both towns had the same propensity to use transit, ridership would be twice as high on the first route as on the second. Since the costs of the two services are the same, the top town is twice as good as an investment for the transit agency.
It really is that simple. Density means that any given service investment is useful to more people, so of course it attracts more riders.
In fact, density is more powerful than that. In this image I contrast two neighborhoods where everything is the same except that one is twice as dense as the other. But in fact, this difference in density generates other important differences that also tend to increase ridership. Parking is more difficult or expensive, and because more things are in walking distance, people are more likely to walk or cycle short distances. People without cars (because they can’t drive, or can’t afford one, or simply don’t want one) also logically choose to locate in higher-density areas where transit, walking, and cycling are easier, and this further reinforces the ridership from these higher density areas. So in many cases, we find that the difference in ridership between these two towns is more than double. It’s double just because there are more people, but in addition, each of these people is also more likely to use transit, because of these other factors that also track with density.
So can we get high ridership out of low density ? Only if we can create artificial density of demand around a transit line or stop. Park-and-Ride, for example, is a way to get people from a low-density area to gather, densely, around a transit station, so that they justify intense service. Park-and-Ride raises other challenges because of the space it takes, but there is a huge range of potential non-transit solutions for giving people ways to get to a transit station, including bike-and-ride, roles for private sector demand-responsive service, and others. From the customer perspective these are called “last mile” solutions. But for a ridership-mazimizing transit authority, these are ways of creating the density of demand, at a transit stop, that makes good service viable, even though that density is not present in the land use.
In the drawing about density I assumed that people could walk to the transit line easily, but that’s not always true. The local street network, and the design of the street that transit runs on, determine whether it’s possible to get to the service. People who can’t get to the service aren’t going to be riders, so this impacts ridership directly.
In this diagram, the two circles on the left have a gray dot in the center, representing a transit stop. The circle is the area that is within a reasonable crow-flies distance of the stop (say 1/4 mile, but it doesn’t matter what you think this distance is).
The circle is a very crude measure of the area where people might find this transit stop useful. However, if you are only willing to walk a certain distance, say 1/4 mile, then the real limit is how far you can walk along the available streets and paths. The streets shaded in black indicates the parts of the neighborhood that are within 1/4 mile walk of the stop, not just 1/4 mile by air.
The local street network makes all the difference. In the neighborhood on the left, the gridded street pattern puts about 2/3 of the circle within walking distance, while the disconnected suburban street pattern on the right puts only 1/3 of the circle within walking distance.
So if all other things are equal, including density, the neighborhood on the right will have half the ridership potential as the one on the left. That means that a transit agency focused on ridership will deploy much more service to the neighborhood on the left than to the one on the right.
Another important dimension of walkability is whether you get to the transit stop in the correct direction. When transit runs on a major street or road, the stops in the two directions of travel are on opposite sides of the road. If you want to make a round trip by transit, you will leave from one side of the road in the morning and be dropped off on the other side in the afternoon. So it has to be possible to cross the road, as a pedestrian, at the stop.
Again, if this is impossible, because there are no signals or other crossing provisions near the stop, then you should expect a ridership-maximizing transit planner to run less service. Some transit professionals argue that transit should never stop where it’s not safe to cross the street, because when pedestrians are hit by cars in this situation, the transit agency is sometimes held liable for having put a stop in an unsafe location.
In the image below, two towns are made up of the same four centers of development. Maybe one is a college, one is a shopping center, one is a mass of apartments, or whatever. In any case, the two towns are identical except for the locations of the four centers.
In the first town they are in a reasonable straight line along a path that transit can follow. That means that a single transit line connects all four centers, in a way that feels reasonably direct for travel between any two centers.
In the second town, a single line connecting all four centers is maddeningly circuitous, and therefore much less attractive if you’re traveling between centers that are not adjacent. There would be another solution for the second town, which is to run a direct bus route between each pair of centers, bypassing the others. But that’s more route-miles, and hence less frequency and duration of service for a given service budget, and hence service that’s less likely to be useful to many people.
Putting development at the end of a long cul-de-sac makes it a worse prospect for ridership, which means a ridership-maximizing transit agency will give it less service. Remember: if you want good transit, locate “on the way” between other places that support good transit.
Finally, notice that you can create the same problem by slowing down a transit service, as road-dieters, traffic-calmers, and bike-lane advocates often inadvertently do. Look at the first town, but now imagine that the two centers in the middle of the line have slowed down the transit service as it runs through them. For ridership, this has exactly the same effect as the layout of the second town: it turns the middle centers into obstacles to travel between the outer centers, discouraging the use of transit for travel between them. (The outer centers will demand an express bus to get around the obstacle, but again, solving the problem with more lines means you can afford less frequency, so service is less useful, so ridership will be lower.)
In this image, two towns are identical except for the distance between the main residential area and the main business area. Longer transit lines cost more to run than short ones, so in the second town it will cost more to serve the same number of people. If a transit budget is the same in the two towns, the second town will have less frequent service or service for a shorter duration. That’s because the same resource is spread over more route miles, yielding less frequency. That, in turn, means lower ridership.
Summing It Up
If you come from a neighborhood that looks like the second town in one of these drawings, how did you react to these images and explanations? Did it sound like I was criticizing your home, or saying you shouldn’t have transit service?
No, those would be aesthetic or moral judgments, and that’s not my job. My job is to explain the how transit is designed if high ridership is the goal. I’m not saying that ridership should be the goal – a moral judgment again – but only that if it’s the goal, this is what transit would logically do. It would look for markets that offer density, walkability, linearity and proximity, and focus excellent service there. Where those features are absent, it would recognize that ridership potential is lower regardless of the service provided, so it would deploy little or no service.
This is how businesses behave, by choosing the markets they will enter, based on where the conditions are right for them to excel. Do you want transit to carry as many people as possible? To what extend do you want that? That’s up to you, and your community.
This Friday we have just two questions. Both have come up frequently as we’ve been out and about in the community.
1. How do the alternatives mesh with land use?
The two ridership alternatives (both Bus Rapid Transit and Rail Rapid Transit) serve the densest parts of the County with higher frequency service, where it is assumed that ridership would be highest. The two coverage scenarios serve a wider area of the County with lower frequency service, where it is assumed that while ridership may be lower, more citizens throughout the County would have access to transit.
All four alternatives provide service on the corridor between Research Triangle Park and downtown Raleigh, where planning for transit-oriented development (generally higher density residential and mixed use development) has occurred. All scenarios also provide some level of service between many of the outlying towns in the County, where a lot of lower-density housing is located, and Raleigh and/or Cary.
2. How do the various options impact private vehicle use? Bus lanes v. general use lanes?
At this time, it is hard to say for certain how the various options could impact private vehicle use. The rail transit lines in the Rail Rapid Transit (RRT) scenarios should not have much of an impact on private vehicle use, since the transit lines would be within the existing railroad corridors; however there may be some impact at existing at-grade crossings due to the higher frequency of trains in the corridor.
The proposed bus corridors in all four scenarios may include some conversion of existing general use lanes to bus lanes, particularly along the Bus Rapid Transit corridors in the two BRT scenarios, but that would be determined once the plan is adopted. If the final adopted scenario includes a BRT corridor, part of the planning and permitting for any BRT corridor would include an evaluation of the impact of converting any existing general use lanes to bus lanes, and that impact could be required to be mitigated.
If you have a question, comment on this blog post or drop us an email (firstname.lastname@example.org) or stop by one of our events. There are MANY scheduled. To find one that works for you, head over to the www.waketransit.com/meetings.
The Wake County Transit Strategy is being developed for a 10 year time-frame. Many people are asking why. Here’s an excerpt from the Expanded Choices report that explains.
The 10 year timeframe – used for the purposes of sketching the four alternatives — was chosen for two key reasons:
Very long-range plans can sometimes seem excessively remote, and difficult for the public to connect their current daily lives to. A decade was selected as a time frame which provides for the opportunity to exercise a degree of long-term vision, but which is likely to still feel immediate and recognizable for people in Wake County.
10 years is probably enough time, given a successful and aggressive approach to application for federal funding, to build a major infrastructure project such as those shown in each alternative.
It is important to note that the plan would be phased in over many years. Some improvements will occur within a few years and others will be closer to or during the tenth year.
Building on the ten year plan developed through this process the final Wake County investment strategy will also identify further investments that can be made after the first phase. Future studies and future decision-makers can modify these later investments as needed to react to how individuals and the market respond to the first phase of investment.
The expanded choices report goes into even greater detail on infrastructure needs, funding and other variable that will be considered within the ten year period. You can read all about the 10 year approach starting on Expanded Choices Report.
After you take a look at the report, be sure to tell us what you think. Your input will help shape the future of Wake County.
The Transit Advisory Committee (TAC) met for the third time on April 8, 2015, to begin preparing for the next phase of the transit investment strategy. During the meeting, the committee was updated on the results of the Transit Choices Report survey, which received approximately 3,900 responses from the public.
Transit consultants Jarrett Walker & Associates and Kimley Horn presented several options for transit solutions in a matrix format, each with a price tag for infrastructure and the resulting available funding for operating ancillary transit service. One axis of the matrix was a ridership versus coverage spectrum; the other axis of the matrix was a high infrastructure to high service spectrum.
Transit technology types were reviewed and the concept of Rapid Rail Transit (RRT) was introduced. This option had not been discussed previously, but was suggested as a possible best fit rail service because it costs less than light rail transit and can provide a variety of frequency options. RRT would be more expensive than a bus-only option, but would offer the benefit of a reliable and frequent rail service through Raleigh, Cary and Morrisville, out to RTP. After discussion, the Advisory Committee voted to remove the light rail option from consideration due to its high cost and remove stand-alone commuter rail because it would not provide a good return on investment. The committee also voted to consider bus-only scenarios with Bus Rapid Transit (BRT) elements in both a ridership scenario and a coverage scenario. Bus Rapid Transit refers to a number of possible infrastructure projects that would make bus vehicles run faster and more reliably. A key advantage of Bus Rapid Transit investments is that they can be scaled directly to demand and can be implemented incrementally.
The work completed at this event, along with public input gathered over the last several months and technical input from local planners, will be used to develop specific transit scenarios that will make up the Expanded Transit Choices Report.
The Wake County Transit Strategy Partners held a Transit Advisory Committee (TAC) today, Tuesday, January 20, 2015, at Marbles Kids Museum in Raleigh. The meeting started with Jarrett Walker and Associates and Kimley Horn reviewing the principles of transit as discussed in the “Wake County Transit Choices Report,” available on Thursday, January 22, 2015.
The TAC was created by the Wake County Transit Strategy partners to develop a broad vision and goals for transit investment
in the County. Because the committee plays this key role, the consultant, the County and our partners wanted it to be reflective of the community make-up and wanted it to be tied into the community as much as possible.
To achieve the representation goal, each municipality and agency was allotted a specific number of seats and asked to appoint members to fill their slots. Municipalities and agencies appointed a member from its decision-making board and also considered business and non-profit leaders, community advocates, transit riders, and neighborhood leaders for the other slots.
During the meeting, the TAC was broken into several groups. The groups were given a map of the region and were asked to develop their own transit plan using transit principles (i.e. coverage, ridership, stops, infrastructure, service frequency, etc.). The goal was for each participant to represent their community or group interest in transit solutions.
The groups used wax sticks to lay out their plan, each color representing different frequency and technology mode of service, and after several hours of discussion, groups presented their plans to the committee. Participants voted on what kinds of service solutions they believed were most important for the community.
Over the next few months, the consultants and local transit planners will take the scenarios discussed today and develop a more detailed choices report.
Starting on Thursday, January 22, 2015, the public can read the “Wake County Transit Choices Report” and give feedback on the report by completing a short survey. The Transit Strategy Partners will also be presenting the scenarios throughout the community. If you would like to request a presentation, please contact Natalie Murdock at Triangle Transit at email@example.com.
The Wake County Transit Strategy partners have been working together behind the scenes for several months. As we are moving ahead in the strategic process and beginning to engage the community, we want to introduce all the partners and answer some of the most common questions about the strategic process.
What is the “New Process”?
Transit consultants Jarrett Walker and Kimley Horn have been hired to review previous work produced by local planning staff and facilitate the creation of a community vision for transit in Wake County.
This new effort will have two major initiatives– public outreach and public education about the various trade-offs to be made when investing in transit.
The process should take approximately seven months.
The new vision will be shared with the public and evaluated by the Wake County Commission, Triangle Transit and CAMPO (Capital Area Metropolitan Planning Organization).
What will the new vision include?
A potential plan for new and enhanced transit services throughout Wake County and the Region could include increased bus service, rail and other modes.
Identify major travel corridors for further study and investment in the short longer term.
Present a decision making structure of how future transit investments can be made when more information is available
What about the “old plan?”
A draft plan was put together by staff from Wake County, Triangle Transit, CAMPO, and many other area stakeholders.
The draft plan is now out of date and needs to be updated with new information and a fresh approach.